Bronze Plaque Materials
Bronze plaques are manufactured using sand molds in a state-of-the-art
foundry from raw ingot alloyed in the following materials:
Equivalent to Copper Development
Association Alloy C92200;
88% copper, 6% tin, 4% zinc, 2% lead.
plaques are the choice for interior as well as exterior
applications. Although the finish of bronze will naturally patina over
time, the material itself will not deteriorate. Objects made from
have been found submerged in seawater for over 3000 years still in
weight of a bronze plaque may be roughly estimated by calculating the
plaque's volume in inches (height x width x depth) x .31. For most
plaques (under 36" x 30") allow .25" as the approximate depth. Use .375"
for plaques over 36" x 30".
Example: For a 36" x 24" plaque calculate 36" x 24" x .25" =
216 cu. inches x .31 = 66.96. The plaque's estimated weight would be
Our bronze plaque tour --->
If you want to jump to certain a specific section of the tour of bronze
plaques, use the links below to jump to that section.
All of our plaques are custom designed and manufactured in the U.S.A.
You may order them as designed here (with your own words of
course), or with any design you desire. Since they are all
custom designed and manufactured, you can change the graphics
and words easily. If you see a plaque that you like,
feel free to fill out our ContactUs form or give us a call
- there is no a cost or obligation.
Copyright © 1998 - 2017 - All Rights Reserved.